Zhengzhou Nissan factory went into operation in 1993, and now it can be considered a 17-year-old factory. However, the factory is old, but here the products and not the old. Like already in the June 18 NV200 is listed from the factory, in addition, the plant also manufactures D22, Paladin, Rich pickup, Succe, and Zhengzhou Nissan Yumsun existing products. Recently, we invited to Zhengzhou Nissan NV200 a factory visit of Assembly production line, below please follow the author's lens look at the NV200 's Assembly process.

This old workshop is located at a Zhengzhou ZhongMu’s Zhengzhou Nissan production factory 

Zhengzhou Nissan factory now has A and b are two production lines, where A line production D22, Paladin, Rich pickup, etc, and B-line is production Yumsun, Succe and NV200.

(1) interior trimming line

After finishing of the NV200 car entered the Assembly shop, the first embarked on the “Trimming line”. Here, the worker is populated, Interior heat insulation pad and cover parts, car parts, window glass, dials and other parts.

To avoid unnecessary body of scratches, NV200 line into the Interior before hood for foil treatment




 
First of all, by the workers to complete the installation of the beam. NV200 harness is from Tianjin matching products



Inside the front door of the NV200 has joined the bumper beam, pay attention to the protection of





After installing your harness, workers begin installing interior insulation mats and rugs



The cabin at the front of the heat insulation pad after installation is complete, start the installation pedal assembly

As the body trim lines, it has been different workers install on side rails, front bumper beam headlamp assemblies waiting for parts. Which, according to the scene of the instructors, the side door Rails NV200 is imported from Japan, has a good quality assurance.

Air conditioning condenser installations. NV200 's air conditioning condenser parts from Henan YUXIN



NV200 Interior panels begin installation

（2）interior trimming line

Next, the NV200 's central control console for loading

The NV200’s central control console or in the Interior line to parts of forms to complete. Now in order to enhance productivity, improve work efficiency, it dials have been part of the team to finish, and then assemble the shaping of dials into the production line. In this way, you can take advantage of the robot and artificial tie will dials quickly installed. Because of the NV200 Livina, TIIDA and come from the same platform, so most of their body parts are from the same fittings allow, according to the commentators that selects the same supplier, one is more familiar with the various links, on the one hand, and the quality of the products also have a good guarantee.

Use of manual operation mode of the machine will be installed into the vehicle control console. However, during the installation process, and remove the door. Otherwise, the control console is unable to successfully install. When the machine hand console installed, followed by workers using tools to reinforce, and vehicles to move on to the next work session.

 
  
   
Before you install the window glass, some workers around the window frame and adhesive sealant for sealing, on which you install another worker



Continue with the installation of a front bumper

When in the entire vehicle group of lines, the vehicle the rug and the heat insulation pad, control console, to play the part, around bumper and head lamp headlamp unit, glass part installments and so on cover finished, NV200 slowly leaves plays the part of the line, under entered together the chassis line working procedure. Although NV200 and the imperial porch and lead the guest to use the collinear assembly the form, but in the fitting depositing area, the different code number expressed that the different vehicle type (NV200=X11M SUCCE =C16A YUMSUN =C24). Therefore, in the assembly link, will not have the situation which the fitting attire will pass each other.

Chassis line

After entering the chassis vehicles began to realize how ambient conveying to the installation of the chassis parts
 


Start by installing the front shock absorber



 

Rear suspension assembling section



Before installing, installs by the worker some small components on the suspension fork, as soon as is advantageous meets the integral erection



The latter suspension fork when installs and artificial coordinates mutually by the machine

 

The exhaust part and the fuel tank are also on-line complete in chassis 



Then there is the engine of the installation



The assembly finished the engine shipped by this automatic car and installs 

 

Auto car running routes from buried in the ground beneath the track



 

Lifting by auto car engine in place, the installation workers stood up and down two floors, with related tools for installation



Then enter the tire installation position

Zhengzhou Nissan NV200 all models are made of Dunlop brand of tires for the 165/R14C. Its high and low profile model in tire, with the exception of hub different materials, the brand and specifications are identical.

 

Zhengzhou Nissan NV200 is Hitachi battery Assembly

Commodity line

After installation finished car, start to enter the final testing process



The first prerequisite for vehicles join various fluid and fuel for a vehicle to operate formally



After all the testing and qualified products, slowly walked down the line, enter the commodity car parking area



commodity car waiting for deliver

Has a 17-year history of Zhengzhou Nissan factory, now every year, 10 million units of capacity are saturated. For the rise of market demand, it has not fully met. In this regard, the second factory in Zhengzhou Nissan in September this year will be formally put into production, production capacity at the beginning of the new factory will reach 12 million units. Coming in second factory in addition to producing NV200, with more new products. With regard to the new factory product specific planning details, Zhengzhou Nissan official will be officially announced in September this year.

Original link: http://www.zznissan.com.cn/news/news-mb.php?id=6231